Full Product Manual

62 THD301 Series User’s Manual
Password: The password for the outgoing email account.
SMTP Server: The SMTP server address of your email provider. For commonly used
mail server settings, see “Common Email Provider Settings” below. If your email
provider is not listed in the table, use your Internet browser to easily find your email
provider’s server address and port by searching ‘smtp settings’ followed by the name
of your email provider.
SMTP Port: The SMTP port used by your email provider.
Enable SSL: Whether the email server you are using requires a secure link.
Sender: Enter a name to identify the sender of the email notification.
Sender Address: The address from which you are sending the email. This will be the
Username you have set up for the email server you are using, followed by “@” and
then the email server. For example: “[e-mail]” or similar.
Select Receiver: Select an e-mail recipient to configure. The DVR can send email
notifications to up to three receivers.
Recipient Address: The email address of which you would like the DVR to send
emails. This can be any email address you like, however, bear in mind that the DVR
might send a large number of automatic emails under certain conditions.
Enable Attach Picture: When this is selected, the DVR will attach a small image to
each email alert (where applicable). For motion-based email alerts, this will be an
image of whatever triggered the motion detection.
Interval: The length of time that must elapse after the DVR sends an email alert
before it can send another.
Common Email Provider Settings:
Gmail Server Address: smtp.gmail.com
Port: 465 or 587
Requires SSL: Yes
Hotmail/Live.com Server Address: smtp.live.com
Port: 465
Requires SSL: Yes
AOL Server Address: mail.aol.com
Port: 465
Requires SSL: Yes
Yahoo Server Address: smtp.mail.yahoo.com
Port: 465 or 587
Requires SSL: Yes