Full Product Manual

20
3
2
Remove the old doorbell.
Place the Doorbell on the wall or use the provided
mounting template to mark the positioning for the
new holes.
For stucco, brick, or concrete, make the new
holes using a 15/64 drill bit and insert the
provided plastic anchors into the holes. For wood
or siding, use a 3/64 drill bit and save the wall
anchors for another project.
1
4
OFF
TURN OFF THE POWER AT THE BREAKER
BEFORE TOUCHING ANY WIRES!
OR
Doorbell Installation Guide
STEP 4: Doorbell Installation