Full Product Manual

21
5
Connect your Night Owl Doorbell to the existing
doorbell wiring. Feed the excess wiring back into
the wall.
Use the provided mounting screws to secure the
Doorbell to the wall.
Once the Doorbell is mounted, place the
faceplate over the Doorbell. Securely fasten
the faceplate using the provided Torx Key and
security screw. (Torx Key is the smaller end of
the provided two-sided tool).
Turn the power back on at the breaker.
Test the Doorbell. If it rings normally, you are
done and can relax. If it does not ring or rings
endlessly, please follow the steps on the next
page to add the Digital Chime Power Amp.
6
7
8
9
NOTE: It does not matter which wire connects to
which screw.
ON