Full Product Manual

22
2
To use the Night Owl Doorbell with a Digital Chime
Remove the cover from your internal doorbell.
Connect one wire from the Power Amp to the
“Front” terminal. Connect the other wire to the
“Transformer” terminal, leaving the existing
doorbell wires in place. Secure both screws
before continuing.
STEP 5: Digital Chime Power Amp Installation
TURN OFF THE POWER AT THE BREAKER
BEFORE TOUCHING ANY WIRES!
1
NOTE: It does not matter which Power Amp wire
connects to which terminal.
4
OFF
3
Loosen the “Front” and “Trans” terminal screws on
your internal doorbell. Make sure you do not remove
the wires connected to the internal doorbell.