Full Product Manual

27
5.2 Smart Doorbell Functionality
5.2.1 Pair Night Owl Doorbell
The Doorbell comes in “Pairing Mode” by default (Status Light turns white and spins clockwise) and
plays the voice prompt “Doorbell is in Pairing Mode” after the initial boot is complete.
The Doorbell can also be set to “Pairing Mode” by resetting it to “Factory Settings.”
The Doorbell can be paired to either a Wi-Fi network or a Night Owl Gateway using the Night Owl
Connect App. Refer to the Software Description section or the Night Owl Connect Manual for more
information.
Once the Wi-Fi login credentials are entered into the Night Owl Connect App, the Doorbell says,
“Please be patient as Doorbell connects to Wi-Fi.”
1
2
3
4
OR
RESET
LAN1 LAN2 LAN3 LAN4 WAN
Please be patient as
Doorbell connects to
Wi-Fi.
Doorbell is in
Pairing Mode.
Wi-Fi Network Night Owl Gateway