Full Product Manual

28
If the pairing process is successful, the Doorbell says, “Woohoo! Setup is now complete,” and the LED
Status Light turns solid white.
5
Woohoo!
Setup is now
complete.
5.2.2 Resetting Doorbell to Factory Settings
Press and hold the “Reset” button for approximately 3 seconds to restore the Doorbell to its factory
settings. The Doorbell will say, “Please be patient as Doorbell restores its Factory Settings.”
The Doorbell restarts and initiates the “Booting Process.”
Once reset to factory setting, the Doorbell loses the connection with the Night Owl Connect App (user
will see the Night Owl Doorbell in the app, but it will be in DISCONNECTED/OFFLINE status). To
restore the Doorbell to “Online” status, delete it from the app and repeat the pairing process.
1
2
3
Please be patient as
Doorbell restores its
Factory Settings.
RIGHT SIDE VIEW
NOTE: The faceplate must be removed in order to
access the sides of the Doorbell.