Installation Guide

To use the Night Owl Doorbell with a Digital Chime
Remove the cover from your internal doorbell.
Connect one wire from the Power Amp to
the “Front” terminal. Connect the other wire
to the “Transformer” terminal, leaving the
existing doorbell wires in place. Secure both
screws before continuing.
STEP 5: Digital Chime Power Amp Installation
TURN OFF THE POWER AT THE BREAKER
BEFORE TOUCHING ANY WIRES!
Note: It does not matter which Power Amp wire
connects to which terminal. Depending on your model
number, the Power Amp may be sold separately.
OFF
Loosen the “Front” and “Trans” terminal
screws on your internal doorbell. Make sure
you do not remove the wires connected to
the internal doorbell.
1
3
2
4
9
DEPENDING ON YOUR MODEL NUMBER, THE DIGITAL CHIME POWER AMP
MAY BE SOLD SEPARATELY.