Installation Guide

Doorbell Installation Guide
STEP 4: Doorbell Installation
Remove the old doorbell.
Place the doorbell on the wall or use the
provided mounting template to mark the
positioning for the new holes.
For stucco, brick, or concrete, make the new
holes using a 15/64 drill bit and insert the
provided plastic anchors into the holes. For
wood or siding, use a 3/64 drill bit and save
the wall anchors for another project.
OFF
TURN OFF THE POWER AT THE BREAKER
BEFORE TOUCHING ANY WIRES!
OR
1
2
3
4
7