Quick Setup Guide

2
Add-On or Stand-Alone
Night Owl gives you options! Your camera can be used as an add-on to an
existing Night Owl Wireless NVR kit or as a stand-alone camera that records to
a microSD card.
Option 1:
Pairing to your existing Wireless NVR System
When used as an add-on to your existing Wireless NVR System, you can view
the camera in the same Night Owl App as the systems other cameras. Please
follow OPTION #1 setup instructions to add your camera.
NOTE: You must complete add-on camera setup in the same room as the NVR.
To use as a stand-alone camera, please follow the Option #2 setup instructions
found on page 6. You will need to download and install the Night Owl Connect
App to view and control the camera. A microSD card (not included) will be
required to use the recording function.
NOTE: Camera will be in pairing mode when first powered on. If the camera is not in
pairing mode please follow pairing instructions found on page 9.
Option 2:
Stand-alone Camera Pairing to your Router
RESET
LAN1 LAN2 LAN3 LAN4 WAN
QSG-WCM-SD2POUV2.indd 3 6/13/19 9:44 AM