Quick Setup Guide

6
Don’t have a Wireless NVR or want to use the camera on its own? No problem! To
use as a Stand-Alone camera the following technical requirements must be met.
Wi-Fi 2.4 GHz Router compatible with 802.11 b/g/n.
High Speed Internet Connection with a minimum of 2 Mbps upload speed.
Optional microSD Card needed to record (not included).
1
2
3
To use as a Stand-alone camera:
Be in same room as the router during setup, if possible.
Power on camera using the camera power adapter.
Camera will be in pairing mode:
Status light will flash quickly.
Camera will say “Camera is in pairing mode”.
NOTE: If the camera is not in pairing mode please refer to page 9 for
pairing instructions.
Know the name and password of Wi-Fi network being used.
NOTE: If you don’t know your Wi-Fi password, please contact your Internet
Service Provider (ISP). Night Owl will not be able to provide this information.
1
2
3
4
A
B
Option #2 Stand-Alone Camera Setup
QSG-WCM-SD2POUV2.indd 7 6/13/19 9:44 AM