Quick Setup Guide

10
A device can be added to the Night Owl Connect App by using the application’s
Smart Auto Detection or through a QR Code Setup. With Smart Auto Detection,
your NVR will automatically be detected by the Night Owl Connect software,
making connecting easy! To use this preferred method, ensure your Smart
Device and NVR are both on the same network.
Connecting and Adding your Device
Ethernet
Cable
WIFI
NOTE: When adding a new device, it may take 5–10 minutes before you begin
receiving notifications.
If your NVR and Smart Device are running
Night Owl Connect on the same network,
the Smart Auto Detection will auto find your
NVR. If this method is not available, please
use the QR Code Setup from step 4B below.
4A
Smart Auto Detection
To use the QR Code Setup, select Setup
device by QR Code and hover your Smart
Device camera lens over the QR Code
located on the top of your NVR.
4B
QR Code Setup
Adding a Device
4
To begin adding a new device, first select
the yellow plus sign within the Device menu.
Then select your device type from the Device
list and follow the on screen instructions.
QSG-WNVR-NC.indd 11 2018/12/24 09:47