Quick Setup Guide

14
1
Power on the replacement
camera using the camera
power adapter.
By default, each camera within your NVR kit comes pre-paired to the NVR.
Additionally, your NVR has its own built-in Wi-Fi for secure, uninterrupted
video transmission and recording. Pairing allows for the wireless
transmission coming from the camera to be detected by the NVR. However,
if you have a camera that needs to be replaced while under warranty, the
replacement camera will similarly need to be paired to the NVR.
NOTE: When pairing a Night Owl add-on camera, refer to “Add-on cameras Quick Setup Guide”.
To pair a replacement camera to your NVR, please use the below steps:
Go to the Camera Menu and
Select the Add Camera tab on
the left side of the menu.
The top portion of the screen
will list cameras that have
been found but not yet paired.
The bottom portion of the screen
will show all cameras that are
currently paired to the NVR.
Pairing a Replacement Wireless Camera
2
With the NVR connected to a
TV/Monitor, right click on your
mouse and navigate to the Main
Menu using the options bar.
3
A
B
C
A
B
C
NOTE: This should be done
locally at the NVR to avoid
interference.
NOTE: Icons may vary depending on model number.
QSG-WNVR-NC.indd 15 2018/12/24 09:47