Quick Setup Guide

15
4
Next, you will need to reset
the replacement camera. To
do so, press and hold the reset
button until you hear a beep,
indicating the camera has
begun the reset process.
6
Within the Wireless Add screen,
the “Number of Cameras
Connected” signifies those
cameras that are already paired
to the NVR and will not
immediately reflect this
new camera.
NOTE: You cannot exceed the number of NVR channels you have. If you have a 4
channel system, the maximum number of cameras you can have paired is 4.
5
After 3 minutes have passed or
after hearing the camera beep,
click on Wireless Add located
on the Add Camera screen.
Your NVR will now search for
new cameras.
NOTE: The replacement camera
will not appear in the bottom
screen with all other paired
cameras until the NVR finishes the
process of finding and pairing the
new camera.
A
B
B
A
NOTE: The reset process may take
up to 3 minutes.
NOTE: The Reset Button location
depends on the camera version.
Pairing a Replacement Wireless Camera
QSG-WNVR-NC.indd 16 2018/12/24 09:47