Quick Setup Guide

2
NVR Rear View
Audio Output – Allows for the connection of an amplified speaker.
VGA Output – Allows for a video connection. If the TV/Monitor does not have
an HDMI input but does have a VGA input, connect the VGA cable from the
VGA output port on the NVR to the VGA input port on your TV/Monitor. (VGA
cable not included)
HDMI Output – Allows for a video connection. If the TV/Monitor has an HDMI
input, connect the HDMI cable from the HDMI output port on the NVR to the
HDMI input port on your TV/Monitor.
RJ-45 (Ethernet) Port – Used to connect the NVR to your modem/router for
remote viewing. Please note your NVR comes with built-in Wi-Fi for the
cameras to transmit to the NVR. However, you will need to manually connect
the NVR to your modem/router to remotely view on a Smart Device or PC/
Mac
®
.
USB Ports – Allow for the connection of a USB mouse and/or a USB flash
drive. Connect the included USB mouse to assist in navigating the NVR’s
menu interface. Connect a USB flash drive to download video files from the
NVR for long term storage or sharing.
Power Input – Used to connect the included 12V DC power supply.
NVR Antenna Mount – For installation of two included NVR antennas.
1
2
3
4
5
6
7
NOTE: The maximum number of cameras you can connect to your NVR will be determined
by the number of channels.
AUDIO
OUTPUT
GROUND
VGA
HDMI
LAN
USB
POWER
12V
1
43
2 5
6
77
Product Overview
QSG-WNVR-NC.indd 3 2018/12/24 09:47