Quick Setup Guide

Connect the NVR power adapter to
the Power Input on the rear of the
NVR.
NOTE: Power adapters will be labeled
as either NVR or Camera.
7
Connect the included camera
antenna to the antenna mount on
the camera.
9
Plug the NVR power adapter
into a surge protector or
Uninterruptible Power Supply
(UPS). (Surge protector and UPS
not included)
8
To verify cameras are working,
please ensure they appear on your
TV/Monitor before mounting them.
10
Each camera comes equipped
with its own camera power
adapter. Connect the female
power cable coming from the
camera to the male power end of
the camera power adapter. Next,
plug the camera power adapter
into a wall outlet.
11
6
NOTE: You should see each camera appear on your TV/Monitor. You may now proceed to
install your NVR cameras in the desired location.
(Surge Protector
Not Included)
NOTE: Make sure NVR is in intended location
before testing cameras.
QSG-WNVR-NC.indd 7 2018/12/24 09:47