Full Product Manual

50 WNVR Series User’s Manual
Refresh: Refreshes the information in the table.
Main Stream: Shows main stream resolution in the table.
Sub Stream: Shows sub stream resolution in the table.
7.2.2 Add Camera
1. Protocol: Establishes the protocol used by the NVR when it is looking for
cameras to pair with.
2. Table 1: Shows the cameras available to pair with the NVR.
3. Table 2: Shows the cameras already paired to the NVR.
4. Wireless Add: Initiates the discovering and pairing process for available
wireless cameras.
5. Add All Cameras: Pairs all cameras in Table 1 with the NVR and places those
cameras in Table 2, so long as the number of cameras in Table 1 does not
exceed the number of available channels on the NVR. This option also will
allow pair cameras that are not in the same network segment as the NVR.
6. LAN Search: Initiates the discovery of cameras over the same network segment
where the NVR is connected.
7. Edit: Allows the network parameters of the cameras in Table 1 to be modified.
8. Advance: Allows advanced options to be Enabled or Disabled.
9. Delete: Will delete the selected camera from Table 2 and move it to Table 1.
10. Delete All: Will delete all cameras from Table 2 and move them to table 1.
11. Manual Edit: Allows the channel connection parameters of the cameras in
Table 2 to be modified.
1
2
3
4
5
6
7
8
9
12
11
10
13