User Manual

1. GENERAL
Operator's Manual WEE-1000 1.13
Disinfecting or Sterilizing
CAUTION
Before cleaning or disinfecting, turn off the power of the telemetry
unit and access point, remove the battery from the telemetry unit and
disconnect the AC power cord from the access point. Otherwise you
may get an electrical shock or the instrument may malfunction.
WARNING
The wireless input unit complies with radio frequency standards.
• Do not disassemble, repair or modify the wireless input unit. If there
is any damage or the unit is suspected to be faulty, attach an
“Unusable” or “Repair request” label to the unit and contact your
Nihon Kohden distributor or representative.
• Do not peel off the radio frequency standard certification label. If the
label is peeled off, this may result in illegal modification.
CAUTION
When upgrading the system program, contact your NK distributor or
representative. When the upgrading fails, the electroencephalograph
may malfunction.
CAUTION
Before disposing of a component of the wireless input unit, check
with your local solid waste officials for details in your area for
recycling options or proper disposal. When disposing of the
telemetry unit, remove the battery from the telemetry unit.
NOTE
• If any static electricity enters the electrode junction box, spike noise
may be superimposed on the waveform.
Maintenance
Disposing
Caution - continued
• While a patient is on medication which causes vasodilation, the pulse
waveform may change and in rare case SpO
2
value may not be
displayed.