User Manual

1. GENERAL
Operator's Manual WEE-1000 1.15
Name Functions
1. Battery holder Contains the battery. Two types of battery holder are provided. One is for the 9 V
lithium-ion rechargeable battery, the other is for the 9 V 006P lithium battery and
alkaline battery. When setting the battery, make sure that the battery is in the same
direction shown by the figure on the holder.
2. Battery holder release lever Releases the battery holder.
3. LCD display Displays the operation status, communication status and remaining battery power.
Battery mark: Displayed in battery operation. When the isolator is con-
nected, the battery mark goes off.
SpO
2
mark: Displays the SpO
2
mark when the JL-101A SpO
2
Adapter is
connected.
Status display: Displays the result of the selected operation or function and
the supplemental information for each function.
4. FUNCTION key Selects the operation item.
ZB-101AA Telemetry Unit
WARNING
Connect only the specified instruments to the connectors or socket marked with , by following the
specified procedure. Otherwise, electrical leakage current may harm the patient and operator.
1
3
4
5
6
7
8
9
10
11
2
Top panel
Front panel Right side panel
Panel Descriptions