User Manual

2. INSTALLATION/PREPARATION
Operator's Manual WEE-1000 2.13
Remaining Battery Power
During battery operation, the battery mark appears on the LCD display. You can
check the remaining battery power on the LCD.
1. When the battery is inserted in to the battery holder, press the START/OK key.
The telemetry unit is turned on and the version information is displayed on the
LCD display.
2. Check the battery operation power by pressing the FUNCTION key. The
battery operation power is displayed on the status display.
The battery voltage is shown as follows.
BH: The battery voltage is about 7 V or more.
BL: The battery voltage is less than about 7 V.
Eb: The battery voltage is less than about 6 V
Replace the battery when “BL” or “Eb” is displayed on the LCD display.
When the battery voltage becomes less than 6 V, the beep sounds and a
message to replace the battery is displayed on the Acquisition screen of the
electroencephalograph.
To turn the power off, select “OF” by pressing the FUNCTION key and press
the START/OK key.
Turn the power off, when you detach the battery holder.