User Manual
Table Of Contents
2. INSTALLATION/PREPARATION
Operator's Manual WEE-1000 2.17
Power Off Procedure
1. Check the following before turning the power off.
Check items before turning the power off
• All necessary files are saved.
• All programs are closed.
2. Turn the power off.
1) On the telemetry unit, select “OF” by pressing the FUNCTION key, then
press the START/OK key.
2) Disconnect the AC power cord of the access point from the AC outlet.
Check the following items for the next use
• Power of all external instruments are turned off.
• Telemetry unit and access point is not dirty, damaged or in contact with
liquid.
• Power cord is not damaged.
• Telemetry unit is turned off
• No key on the telemetry unit is broken.
• Battery is removed from the battery holder.
• Lithium battery or alkaline battery is correctly disposed of.
• No electrode is dirty or damaged.
• No electrode lead is frayed or damaged.
• No connection cable is frayed or damaged.
• Electrodes and leads are cleaned and disinfected.
• Enough electrodes.
• Enough EEG paste.