User Manual
Table Of Contents
3. EEG/PSG MEASUREMENT
Operator's Manual WEE-1000 3.19
Connect the electrodes and sensors to the electrode junction box. Two types of
electrode junction box can be used.
• JE-011A Electrode Junction Box
30 channels of EEG waveforms or 22 channels of EEG waveforms, 8 channels of
bipolar signals and 2 channels of DC input signals.
• JE-012A Electrode Junction Box
For polysomnogram (PSG) measurement
• JE-013A Electrode Junction Box
62 channels of EEG waveforms and 2 channel of DC input signals
NOTE
• Do not bend or pull the lead or cables. This may damage them.
• The following extra jacks can be used as bipolar jacks. To select
extra jacks or bipolar jacks, refer to the System Program.
- JE-011A Electrode Junction Box: X2 to X9
- JE-012A Electrode Junction Box: X17 to X24
When using the extra jack as the extra jack, only the (+) jack is
available. When using the extra jack as the bipolar jack the (+) and (-)
jacks are available.
For electrode combination (montage), refer to “Changing System Settings -
Programming Pattern” in Section 4 of the operator’s manual for each
electroencephalograph .
Connecting the Electrodes and Sensors to the Electrode Junction
Box