User Manual

3. EEG/PSG MEASUREMENT
Operator's Manual WEE-1000 3.23
Measuring Waveforms
Example: EEG-1100
This section explains the general procedure how to measure the waveforms.
1. Start the communication between the telemetry unit and access point.
Wireless communication:
1) Turn on the access point
2) Press the START/OK key on the telemetry unit. Blinking “O” is displayed
on the LCD display.
Wired communication:
1) Turn on the access point
2) Connect the telemetry unit and access point with the isolator. The channel
“CL” is displayed on the LCD display.
2. Open the Acquisition program.
NOTE
Turn off any screen saver and close all application programs before
opening the Acquisition program. Otherwise, the Acquisition
program may not function properly.
Double-click the acquisition program shortcut icons on an EEG window. A
new EEG file automatically opens with the Room Selection dialog box.
3. Select the access point and telemetry unit.
1) On the Room Selection dialog box, select the access point by selecting the
room.
2) On the Telemetry Unit Selection dialog box, select the telemetry unit.
3) Start communication.
When communication between the telemetry unit and access point is
established, the Patient Information dialog box opens.
4. Enter the patient information. The patient ID and name must be entered.