User Manual

3. EEG/PSG MEASUREMENT
3.2 Operator's Manual WEE-1000
CAUTION
• Do not use a device which uses Bluetooth® wireless technology and
wireless LAN device which complies with IEEE 802.11b near the
wireless input unit at the same time. If they are used together, the
radio waves interfere with each other. This may prevent the
communication between the telemetry unit and access point by
reducing transmission speed and transmission distance.
• Do not give impact to the telemetry unit. Spike noise may be
superimposed on the waveform.
• Use the provided pouch to hold the telemetry unit, electrode junction
box and/or isolator when they are attached to the patient.
• When moving the patient, make sure that the cable connected
between the isolator and access point is disconnected. Otherwise,
the patient may fall over the cable, or the cable may be broken.
• Do not shake or swing the telemetry unit holding the cable
connected to the telemetry unit. The telemetry unit may come off and
it may injure somebody or damage surrounding instruments.
• Do not shake or swing the electrode junction box holding the cable
or EEG lead connected to the electrode junction box. The electrode
junction box may come off and it may injure somebody or damage
surrounding instruments.
• During measurement, do not change the date and time. This makes
the order of the saved event data and the time of the saved
waveforms incorrect.
NOTE
Turn off any screen saver and close all application programs before
opening the Acquisition program. Otherwise, the Acquisition
program may not function properly.