User Manual

3. EEG/PSG MEASUREMENT
Operator's Manual WEE-1000 3.5
Flowchart of Waveform
Measurement
After measurement, use the Review program to review and print the waveforms.
1. Attach the EEG electrodes and sensors to the patient.
2. Connect the electrode junction box and cables to the telemetry unit.
3. Attach the telemetry unit to the patient.
4. Turn on the telemetry unit and access point.
5. Start the Acquisition program (New file automatically opens).
6. Select the telemetry unit and access point.
7. Enter the patient information.
8. Check skin-electrode contact impedance.
9. Lock the telemetry unit.
10. Start EEG/PSG measurement (recording).
11. Display and record the calibration waveforms.
12. Measure the waveforms.
13. End the measurement and close (save) the EEG data file.
14. Close the Acquisition program.
15. Review the saved EEG/PSG waveforms.