User's Manual

34 Operator’s Manual ZM-520PA/521PA/530PA/531PA
NOTE
FUNCTION KEY (on the second page of
the SYSTEM SETUP screen) can be set to
“SUSPEND ALARM & PAUSE” or “CONFIRM”
only when PROTOCOL is “51”. If PROTOCOL
is changed to “41”, FUNCTION KEY is
automatically changed to “OFF”.
4. Press the Function key to register the selected
setting. The cursor returns to “PROTOCOL”.
BRIGHTNESS
Select the screen brightness.
1. Press the
▼ key to move the cursor to “BRIGHTNESS”.
2. Press the Function key.
3. Press the
▼ key to select “DARK” or “BRIGHT”.
4. Press the Function key to register the selected setting. The cursor returns to
“BRIGHTNESS”.
FUNCTION KEY
Select the function of the Function key. For details on using these functions, refer to “Basic
Monitoring Operation” in the “Monitoring” section.
SUSPEND ALARM & PAUSE: Suspends alarm on the receiving monitor for 2 minutes. Pauses
monitoring on the transmitter and receiving monitor.
SUSPEND ALARM: Suspends alarm on the receiving monitor for 2 minutes.
CONFIRM: Displays the “PATIENT CONFIRMED” message on the
transmitter screen and transmits the message to the receiving
monitor.
OFF: No function.
NOTE
“SUSPEND ALARM & PAUSE” and “CONFIRM” can only be set when PROTOCOL is set
to 51.

૞ᚑ㒙ጊޓᖘᏆ ᛚ⹺⌀ᨩޓ⌬