User's Manual

Operator’s Manual ZM-520PA/521PA/530PA/531PA 51
Monitoring
CAUTION
The measurement values and displayed waveforms on the transmitter and receiving
monitor may be different due to timing delay of the display or difference in detection
settings.
NOTE
Do not let the transmitter continuously contact the patient’s skin directly. The transmitter
heats up by 2 or 3°C (4 or 5°F) during operation and it may cause low temperature burn
to the patient.
Screen Descriptions
When the transmitter is turned on, the startup screen appears, then the check electrodes screen to
check the electrode attachment appears.
The screen changes in the following order each time the Screen key is pressed.
Check electrodes → numeric and waveform → waveform review → numeric review → display
off → check electrodes . . .
Screen key

૞ᚑ㒙ጊޓᖘᏆ ᛚ⹺⌀ᨩޓ⌬