User's Manual

36 Operator’s Manual ZM-520PA/521PA/530PA/531PA
Attaching Electrodes and SpO
2
Probe to the Patient
Attaching Electrodes
Selecting Electrode Lead
CAUTION
Only use Nihon Kohden specified electrodes and electrode leads. When other type of
electrodes or electrode leads are used, the “CHECK ELECTRODES” message may
be displayed and ECG monitoring may stop.
The following optional electrode leads can be used with the transmitter.
%53$HOHFWURGHV$+$FOLSW\SH
%53$HOHFWURGHV$+$FOLSW\SH
Connecting the Electrode Lead to the Transmitter
&RQQHFWWKHHOHFWURGHOHDGWRWKH(&*5(63VRFNHWRQ
the transmitter.
WARNING
After attaching the electrode to the patient and connecting the electrode lead to the
transmitter, check that electrodes are attached to the patient and check that the
electrode lead is connected to the transmitter properly. When the electrodes are
removed from the patient, do not touch the metal part of the electrode with bare
hands or let the metal part of the electrode contact the metal part of the bed or any
other conductive parts. Failure to follow this warning may cause electrical shock or
injury to the patient by discharged energy.