User's Manual
28 Operator’s Manual ZM-520PA/521PA/530PA/531PA
Changing Parameter Setup Settings
ECG ELECTRODES
Select the electrode lead type.
1. On the PARAMETER SETUP screen, press
the
▼
key to move the cursor to “ECG
ELECTRODES”.
2. Press the Function key. The cursor moves to
the selection item.
3. Press the
▼
key to select “IEC” or “AHA”.
4. Press the Function key to register the
selected setting. The cursor returns to “ECG
ELECTRODES”.
LEAD TYPE
Select the type of ECG leads. In normal use, select “AUTO”. When using DIN type lead with 6
electrodes, select “6 LEADS”.
1. On the PARAMETER SETUP screen, press the
▼
key to move the cursor to “LEAD TYPE”.
2. Press the Function key.
3. Press the
▼
key to select “AUTO” or “6 LEADS”.
4. Press the Function key to register the selected setting. The cursor returns to “LEAD TYPE”.
Setting item
Cursor
Setting item
Cursor
Selected setting
Cursor
Selected setting
Cursor
ᚑ㒙ጊޓᖘᏆ ᛚ⌀ᨩޓ⌬