User's Manual

36 Operator’s Manual ZM-520PA/521PA/530PA/531PA
Initializing Settings
Do the following procedure to initialize all settings, except for channel, to the factory default
settings.
1. Turn off the transmitter by removing a battery.
2. While pressing the Function key, turn on the
transmitter (put back the battery). The MENU
screen appears.
3. Press the
▼ key to move the cursor to
“SYSTEM INITIALIZE”.
4. Press the Function key to enter SYSTEM
INITIALIZE screen.
5. Press the Function key to initialize settings.
The confirmation message appears.
To return to the MENU screen without
initializing, press the Screen key.
6. Press the Function key to initialize settings.
To cancel initializing, press the
▼ key. The
screen returns to the MENU screen.
CursorCursor

૞ᚑ㒙ጊޓᖘᏆ ᛚ⹺⌀ᨩޓ⌬