User's Manual

Operator’s Manual ZM-520PA/521PA/530PA/531PA 17
CAUTION
Failure to follow these instructions may
cause cable discontinuity, short circuit,
skin burn on the patient from the probe
temperature increase due to the short
circuit of the probe cable, and incorrect
measurement data. If the probe is
broken, replace it with a new one.
• Do not immerse any part of
the probe cable other than the
disposable probe in chemical
solutions or water.
• Do not pull or bend the probe cable.
• Do not let caster feet run over the
probe cable.
CAUTION
If the attachment site is dirty with blood
or bodily fluids, clean the attachment
site before attaching the probe. If there
is nail polish on the attachment site,
remove the polish. Otherwise, the
amount of transmitted light decreases,
and measured value may be incorrect
or measurement cannot be performed.
CAUTION
If the skin gets irritated or redness
appears on the skin from the probe,
change the attachment site or stop
using the probe. Take extreme care for
the patients with delicate skin.
Maintenance
CAUTION
This transmitter is not waterproof. If
detergent or liquid spills into the
transmitter, stop cleaning or
disinfecting it and contact your Nihon
Kohden representative. The transmitter
needs to be checked for safety and
function before use.
CAUTION
Do not immerse the electrode lead
connector in liquid.
CAUTION
Dispose of Nihon Kohden products
according to your local laws and your
facility’s guidelines for waste disposal.
Otherwise, it may affect the
environment. If there is a possibility
that the product may have been
contaminated with infection, dispose of
it as medical waste according to your
local laws and your facility’s guidelines
for medical waste. Otherwise, it may
cause infection.
CAUTION
Never disassemble or repair the
transmitter. If there is any problem with
the transmitter, contact your Nihon
Kohden representative.