User's Manual

30 Operator’s Manual ZM-520PA/521PA/530PA/531PA
Changing SYSTEM SETUP Settings
System Setup Setting List
The factory default settings are underlined.
Setting Item Description Settings
PROTOCOL
Select the transmitting protocol.
51: New protocol. A central monitor with an
25*$RU25*$PXOWLSOHSDWLHQWUHFHLYHU
ZKRVHVRIWZDUHYHUVLRQRUODWHUFDQUHFHLYHWKLV
protocol.
41: Old protocol. A central monitor with an
25*$25*$RU25*$PXOWLSOH
patient receiver can receive this protocol.
NOTE
When 51 is set, the receiving monitor must be able
to receive protocol 51. Otherwise, signals from the
transmitter cannot be received. To use protocol 51,
an ORG-9100A or ORG-9110A multiple patient
receiver software version 03-03 or later is required.
51, 41
%5,*+71(66 Select the screen brightness.
DARK,
%5,*+7
)81&7,21.(<
6HOHFWWKHIXQFWLRQRIWKH)XQFWLRQNH\
6863(1'$/$503$86(
Suspends alarm on the receiving monitor for 2
minutes. Pauses monitoring on the transmitter and
receiving monitor.
6863(1'$/$50
Suspends alarm on the receiving monitor for 2
minutes.
CONFIRM:
 'LVSOD\VWKH³3$7,(17&21),50('´PHVVDJH
on the transmitter screen and transmits the
message to the receiving monitor.
OFF: No function.
NOTE
“SUSPEND ALARM & PAUSE” and “CONFIRM”
can only be set when PROTOCOL is set to 51. To
use protocol 51, the ORG-9100A or ORG-9110A
multiple patient receiver software version 03-03 or
later is required.
6863(1'
ALARM
3$86(,
6863(1'
ALARM,
CONFIRM,
OFF