User's Manual
30 Operator’s Manual ZM-520PA/521PA/530PA/531PA
SpO2 RESPONSE
Select the SpO
2
response mode.
FAST: Select this for special applications that require a fast response. FAST is suitable for
detecting short apnea.
NORMAL: For normal monitoring.
SLOW: Select this when you need to suppress a rapid change in SpO
2
.
1. On the PARAMETER SETUP screen, press
the
▼
key to move the cursor to “SpO2
RESPONSE”. “SpO2 RESPONSE” is on the
second page of the PARAMETER SETUP
screen.
2. Press the Function key.
3. Press the
▼
key to select “FAST”,
“NORMAL” or “SLOW”.
4. Press the Function key to register the
selected setting. The cursor returns to “SpO2
RESPONSE”.
PARAMETER SETUP screen - page 2PARAMETER SETUP screen - page 2
ᚑ㒙ጊޓᖘᏆ ᛚ⌀ᨩޓ⌬