User's Manual

Operator’s Manual ZM-520PA/521PA/530PA/531PA 3
Receiving Monitor
Any Nihon Kohden receiving monitor (central monitor with multiple patient receiver) can receive
signals from this transmitter as long as the protocol version and channel setting are the same on the
receiving monitor and transmitter.
NOTE
For details on the receiving monitor and upgrade information, contact your Nihon
Kohden representative.
The transmitter does not give any alarm other than a “low battery” alarm. Alarms must
be managed on the receiving monitor.
To use protocol 51, an ORG-9100A or ORG-9110A multiple patient receiver software
version 03-03 or later is required. For the protocol setting, refer to the “Changing
SYSTEM SETUP Settings” section.