User's Manual
Operator’s Manual ZM-520PA/521PA/530PA/531PA 23
Batteries
• The battery polarity is correct.
7KHEDWWHU\FDVHVSULQJLV¿UPO\DWWDFKHGDQGWKHEDWWHU\LVQRWORRVH
7KHEDWWHU\FDVHFRYHULV¿UPO\FORVHG
Channel Setting
• The transmitter channel matches the receiving monitor channel.
• There is no nearby transmitter with the same channel.
Other
:KHQSHUIRUPLQJGH¿EULOODWLRQVHWWKHKXP¿OWHUWR21RQWKHUHFHLYLQJPRQLWRU7KH
ZDYHIRUPUHFRYHU\PD\EHFRPHVORZGXHWRHOHFWURGHSRODUL]DWLRQZKHQWKHKXP¿OWHULVVHWWR
OFF.
Check Items After Power On
$IWHUWXUQLQJRQWKHSRZHUFKHFNWKHIROORZLQJ
Power On
• The transmitter generates a one second “peep” sound and the startup screen appears.
7KHWUDQVPLWWHUGLVSOD\VWKHFKHFNHOHFWURGHVVFUHHQ
• The transmitter is not too hot.
7KHWUDQVPLWWHUGRHVQRWGLVSOD\WKH³%$77(5<:($.´PHVVDJH
• The transmitter does not interfere with the operation of other medical instruments.
Daily Check
• The “signal loss” message is not displayed on the receiving monitor when the transmitter is
inside the receiving range of the monitor.
• The battery replacement message is not displayed on the monitor.
7KHNH\VRQWKHWUDQVPLWWHUIXQFWLRQSURSHUO\
7KH/&'EULJKWQHVVLVDSSURSULDWH7RDGMXVWEULJKWQHVVUHIHUWRWKH³&KDQJLQJ6<67(0
6(7836HWWLQJV´VHFWLRQ
Check Items After Use
7RXVHWKHWUDQVPLWWHULQVDIHDQGRSWLPXPFRQGLWLRQIRUQH[WWLPHFKHFNWKHIROORZLQJ
Before Turning Power Off
7HPSRUDULO\FKDQJHGVHWWLQJVDUHFKDQJHGEDFNWRWKHSUHYLRXVVHWWLQJV
• There was no malfunction on the transmitter.
Storage
(&*HOHFWURGHOHDGVDQG6S2
2
probe are cleaned and disinfected.
• If the transmitter got wet, liquid is wiped off and the transmitter is thoroughly dried.
• There are enough consumables, such as disposable electrodes.
• The transmitter power is turned off by removing batteries from the transmitter.
• Dead batteries are disposed of properly.