User's Manual
74 Operator’s Manual ZM-520PA/521PA/530PA/531PA
Problem Possible Cause Action
Signal receiving
condition is poor.
Another transmitter with the
same channel is used nearby.
Turn the transmitter power off. If the
monitor still receives a signal, there
is a high probability that another
transmitter of the same channel is
used nearby. Follow the instruction
of your channel administrator and use
another transmitter with a different
channel.
Signals of another patient are
mixing.
Follow the instructions of your
channel administrator and use another
transmitter of a different channel.
The transmitter is damaged. Contact your Nihon Kohden
representative.
ECG/Respiration
Problem
Possible Cause Action
The heart rate is
unstable.
Pacing detection setting on the
monitor is not correct.
Turn off the pacing detection setting
on the receiving monitor. When
PRQLWRULQJDSDFHPDNHUSDWLHQWWXUQ
on pacing detection.
7KH³&+(&.
(/(&752'(6´
message appears
on the receiving
monitor.
(OHFWURGHOHDGLVGLVFRQQHFWHG
from the electrode.
Firmly connect the electrode lead to
the electrode.
(OHFWURGHOHDGGLVFRQWLQXLW\ Replace the electrode lead with a new
one.
(OHFWURGHLVQRW¿UPO\DWWDFKHG
WRWKHVNLQ
Replace the electrode with a new one.
Polarization voltage is
abnormally high.
8VH1LKRQ.RKGHQVSHFL¿HG
electrodes.
(&*EDVHOLQHLV
WKLFN$&KXP
The gel on the electrode is dried
out.
Replace the electrode with a new one.
The gel on the electrode is
coming off.
$QHOHFWULFEODQNHWLVXVHG &RYHUWKHEODQNHWZLWKDVKLHOGFRYHU
7KHKXP¿OWHULVVHWWR2))RQ
the monitor.
6HWWKH¿OWHUWR21