User's Manual

Operator’s Manual ZM-920PA/921PA/930PA/931PA 57
Cleaning, Disinfection and Sterilization
Transmitter and Electrode Lead
CAUTION
If detergent or liquid spills into the transmitter, clean it and dry it
completely before use. If a wet transmitter is used, the transmitter
may malfunction or get damaged.
CAUTION
Before cleaning or disinfection, remove the batteries from the
transmitter. Failure to follow this instruction may result in electrical
shock or transmitter malfunction.
CAUTION
The transmitter cannot be sterilized. Sterilizing the transmitter may
damage it.
CAUTION
Dispose of the transmitter, options and accessories as specified by
Nihon Kohden. Otherwise, it causes infection or environmental
contamination.
Before cleaning or disinfecting, remove the batteries from the transmitter. Be
careful not to let any liquid get inside the transmitter.
Cleaning
Wipe the transmitter and electrode leads with a soft cloth moistened with
disinfecting alcohol or neutral detergent diluted with water. After cleaning, dry
them completely.