User's Manual

Operator’s Manual ZM-940PA/941PA 45

Placing the Transmitter on the Bed (Using the Disposable Cuffs or YP-960T series Reusable

Cuffs)

1. Put the cuff on the upper arm so that the ▼mark

of “ARTERY ▼” aligns with the artery of the

patient.

ARTERY ▼

2. Wrap the cuff so that “INDEX ” comes

within the “ RANGE ”.

If “Index ” is not within the “ RANGE

”, change the cuff size.

Attaching Electrodes

Selecting Electrode Lead

CAUTION

Only use Nihon Kohden speciﬁed electrodes and electrode leads. When other type of

electrodes or electrode leads are used, the “CHECK ELECTRODES” message may

be displayed and monitoring may stop.

The following electrode leads can be used on the transmitter (option).

BR-903PA,

3 electrodes,

clip type

BR-913PA,

3 electrodes,

snap type

BR-906PA,

6 electrodes,

clip type

BR-916PA,

6 electrodes,

snap type

RANGERANGE