User's Manual

96 Operator’s Manual ZM-940PA/941PA
The above data is when the following batteries and battery charger which are recommended by
Nihon Kohden are used. The measurement is performed at room temperature, NIBP is measured in
auto mode at 60 minute intervals and SpO
2
ismeasuredonanindexngerofamalepatientwith
weight60kg.OperationtimedependsonthethicknessoftheSpO
2
probe attachment site.
NiMHsecondary: SANYOHR-3UF(W)
Battery charger: SANYO NC-M55
Alkalineprimary: NihonKohdenMedipower(equivalenttoPanasonicLR6(G))
Dimension and Weight
Dimension: 114W×103H×58D(mm)
Weight: 280 g ±30 g (excluding batteries, NIBP cuff and other
accessories)
Environment
Operating environment
Operating temperature: 5 to 40°C, 41 to 104°F
When using NIBP cuff, 10 to 40°C, 50 to 104°F
Operating humidity: 30 to 85% (non-condensing)
Operatingatmosphericpressure: 70to106kPa
Storage environment
Storagetemperature: −20to65°C,−4to149°F
Storage humidity: 10 to 95%
Storageatmosphericpressure: 70to106kPa
Safety Standards
Safety standard: CAN/CSA-C22.2 No. 601-1 M90: 1990
CAN/CSA-C22.2 No. 601-1. 1S1-94: 1994
CAN/CSA-C22.2 No. 601-1. 1B-90: R2002
CAN/CSA-C22.2 No. 60601-2-49-04: 2004
 CAN/CSA-C22.2 No.601.2.27-98:1998
CAN/CSA-C22.2 No. 60601-2-30-02: 2002
IEC 60601-1:1988
IEC 60601-1 Amendment 1: 1991
IEC 60601-1 Amendment 2: 1995
IEC 60601-1-2: 2001
IEC 60601-1-2 Amendment 1: 2004
 IEC60601-2-27:2005
IEC 60601-2-30: 1999
IEC 60601-2-49: 2001