Smart Label Printer Quick Start Guide NIIMBOT D101 Wuhan Jingchen Intelligent ldentificationTechnology Co., Ltd. Support Email : service@niimbot.com Official Website : www.niimbot.net Office Address :Creative Workshop No. 5, Creative World,Yezhihu West Road,Hondshan District,Wuhan,China Production Address : No. 1 Tianyang Road, Chuanlong Avenue, Hengdian Street, Huangpi District, Wuhan, China © 2022 NIIMBOT. All rights reserved.
CONTENTS 01 Package Contents 02 02 Installation 03 03 Installing App 05 04 Connecting and Printing 06 05 Basic Functions 07 06 LED Indicators 08 07 Specifications 09 08 Safety Precautions 10 09 Related statements 12
01 · 02 01 Package Contents Smart Label Printer *1 Label Paper Roll *1 USB Type-C Cable *1 Quick Start Guide *1
02 Installation 1 Swipe left on the slider to open the lid. Paper Compartment Baffle 2 Remove or keep the baffle according to the width of the label paper. About the baffle: Insert the label paper directly if your label paper is not wider than 15mm. If its width is 15mm-27mm, remove the baffle before installing.
03 · 04 Right Left 3 After confirming the width, install it against the right side of the paper compartment, with the print side facing down. Power Button 4 Close the lid. Long-press the power button and the printer will be ready for use.
03 Installing App 1 Before using the printer, please install the NIIMBOT app from Google Play or the App Store. NIIMBOT Design & Print APP easy to download and use More information available on the NIIMBOT app. Sign in to NIIMBOT Me Help Center Hardware 2 Get the NIIM app for more label designs for homes.
05 · 06 04 Connecting and Printing 1 Open NIIMBOT app and turn on Bluetooth on your phone. 8:30 NIIMBOT Turn on Bluetooth 2 On Home, tap Connect smart label printer. Then select device model. Notice: If a PIN code is required, input 0000 or 1234. 3 After connecting, tap on "Current label template" on the Home tab to enter the label editor. Special Notes Images of products, accessories, and the app in this manual are for illustrative purposes only and may be different from actual products.
05 Basic Functions Function Operation Switch on Hold down the Power button for three seconds. Switch off Hold down the Power button for three seconds when the device is on. Print history Press the Power button once when the device is on. Print a test page Double-press the Power button when the device is on.
07 · 08 06 LED Indicators Indicator Status Blue Blinking slowly Standby Blue Blinking fast Charging Blue Solid Bluetooth connected Red Blinking slowly Battery low, standby Red Blinking fast Battery low, charging Red Solid Description Battery low, Bluetooth connected
07 Specifications Product Dimensions Charging Time Label Printer Model NIIMBOT D101 130*80.
09 · 10 08 Safety Precautions Please read all the instructions and warnings in this manual carefully before using this product to ensure the proper functioning of the device and your safety. *Warnings Don't disassemble the product without authorization. Disassembled products cannot be returned or exchanged. Do not wipe the product with corrosive chemicals or cleaning agents. Do not use the product near places with flammable products such as gas stations or fuel depots. 1.
6. The battery contains special protection circuit and device, please do not disassemble the battery without authorization, otherwise it may cause a short circuit or leakage. If electrolyte gets into your eyes, flush with water immediately and seek medical help; 7. Do not expose the product and the power adapter to high temperature or high humidity. Do not put them in water, otherwise a short circuit may occur and the battery may heat up, smoke, deform, damage, or even explode; 8.
11 · 12 09 Related Statements FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement.The device can be used in portable exposure condition without restriction. Declaration of conformity Hereby, Wuhan Jingchen Intelligent Identifification Technology Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive (RED) 2014/53/EU.
13 · 14 L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L' appareil ne doit pas produire de brouillage; (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement.
