NPRC56PK Portable radio USER MANUAL EN © Elmarc, 16/11
Content 1 1.1 1.2 1.3 Safety 3 Intended use 3 Labels in this manual 3 General safety instructions 3 2 2.1 2.2 Preparations for use Unpacking Package contents 6 6 6 3 3.1 3.2 Installation Connecting to the mains Install batteries 7 7 8 4 4.1 4.2 Functions NPRC56PK General functions 9 9 10 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.
1 Safety 1.1 Intended use The device functions as a portable radio/CD audio player. The device can play music (MP3) via CD, USB and SD card. Music can be played wirelessly via the bluetooth connection. It is also possible to play music via the AUX port. 55 Read the manual carefully before the first use. 1.2 Labels in this manual 66 WARNING A warning means that injury is possible if the instructions are not obeyed. 11 CAUTION A caution means that damage to the equipment is possible.
66 Never leave children unattended with the packing material. The packaging material represents a danger of suffocation Children frequently underestimate the danger.always keep childern away from the packaging material. 66 To prevent hearing damage, remember to adjust the volume to a comfortable level. 11 CAUTION Do not spill any liquid on the appliance. 11 CAUTION Do not block the ventilation holes. 11 Clean the outside of the appliance with a soft cloth.
5 If this appliance is equipped with rubber feet to prevent it from moving: The feet are made from non-migrating material specially formulated to avoid leaving any marks or stains on furniture. However, certain types of furniture polishes, wood preservatives or cleaning sprays cause the rubber to soften and leave marks or a residue on the furniture, and potentially risk the surface to become damaged.
2 Preparations for use 2.1 Unpacking 66 Never leave children unattended with the packing material. The packaging material represents a danger of suffocation Children frequently underestimate the danger.always keep childern away from the packaging material. • Check the package contents as described below. If any item is missing, please contact your reseller. • Remove the labels from the front panel carefully if present.
3 Installation • Put the appliance on a horizontal flat surface. • Connect the appliance to the mains. 66 Check the product,cable and (if applicabl) adapter for any damage before use. If there is any visible damage,astrong odour,or excessive overheating of components, unplug the product. 11 CAUTION Do not put the appliance near a heat source. 11 CAUTION Do not expose the appliance to direct sunlight. 55 This appliance is equipped with rubber feet to prevent it from moving.
3.2 Install batteries 4x AA The appliance can also be operated on battery power. For this purpose, the appliance uses 4 batteries (AA). 55 Please note: these batteries are not included. 55 If you do not use the appliance for an extended period, remove the batteries. Install batteries • Remove the battery cover. • Insert the batteries matching the (+) and (-) polarity markings. • Re-install the battery cover.
4 Functions 4.1 NPRC56PK 1 2 4 5 8 7 3 9 10 12 17 11 18 13 14 15 16 6 1. Handle 2. CD compartment 3. LCD Display 4. POWER/STANDBY button 5. FUNCTION button 6. Buttons VOLUME UP/DOWN 7. PLAY MODE/PROG/CLK.SET button 8. Speaker 9. PLAY/PAUSE/PARING/MO.ST button 10. Buttons PRE-/AL1, AL2/PRE+ 11. Buttons PREV TUNE-/NEXT TUNE+ 12. STOP/SLEEP/SNOOZE button 13. AUX jack: 3.5 mm 14. USB slot 15. Memory card slot (SD/MMC) 16. Headphone jack 17. Plug contact 18.
4.2 General functions 9 5 7 6 16 FUNCTION button • To select the source mode, press the FUNCTION button (5). Digital volume control • To adjust the volume, press the VOL - (6) button or the VOL + button (6). Headphone jack (16) • To connect a headphone, insert the cable plug in the headphone jack. To prevent hearing damage, remember to adjust the volume to a comfortable level.
5 Operation 5.1 Setting the clock 11 7 • Set the appliance in the standby mode. • Keep key PLAY MODE/PROG/CLK.SET (7) pressed for 2 seconds • Press the PREV TUNE- (11) or NEXT/TUNE+ (11) key to choose between 24 or 12 hour time display. • "12H" or "24H" appears on the display. • Press PLAY MODE/PROG/CLK.SET (7) to confirm. • Press the PREV TUNE- (11) or NEXT TUNE+ (11) key to set the desired hour. • Press PLAY MODE/PROG/CLK.SET (7) to confirm.
5.2 Setting an alarm 55 Caution! You can set and activate two alarms. 10 12 11 6 Alarm 1 • Set the appliance in the standby mode. • Keep key PRE-/AL1 (10) pressed for 2 seconds • AL1 appears on the display. • Press the PREV TUNE- (11) or NEXT TUNE+ (11) key to set the desired hour. • Press PRE-/AL1 (10) to confirm. • Press the PREV TUNE- (11) or NEXT TUNE+ (11) key to set the desired minutes. • Press PRE-/AL1 (10) to confirm.
Snooze alarm • To snooze the alarm, press STOP/SLEEP/SNOOZE (12). The alarm sounds again after the snooze time has elapsed. The default snooze time is: 6 minutes. Turn off alarm • Press the STANDBY key once (4). 5.3 Using the timer 12 5 • Select the desired source. • To do this, press the FUNCTION key (5). • Keep key STOP/SLEEP/SNOOZE (12) pressed for 2 seconds SLEEP appears on the display. • Press the button STOP/SLEEP/SNOOZE (12) repeatedly until the desired setting is found.
5.4 Radio functions 9 10 5 7 11 • Slide out the antenna • To select the source mode TUNER, press the FUNCTION button (5). "FM" appears on the display. To switch between Mono and Stereo reception, press the MO/ST button (9). Automatically adjust the frequency • Keep key PLAY/PAUSE/PAIRING/MO-ST (9) pressed for 2 seconds • To skip to the next preset station, press the PRE-/AL1 button (10) or the AL2/PRE+ button (10).
5.5 CD functions To insert a CD: • Press the CD compartment (2) to open the appliance • Insert the CD with the label upwards • Close the CD compartment Playing a CD: 11 Make sure that no external device is connected to the AUX IN port. 9 5 7 12 11 • To select the source mode CD, press the FUNCTION button (5). CD appears on the display. • To pause playback, press the PLAY/PAUSE button (9) once.
Program track sequence • To stop playback, press the STOP button (12). • To play a list of tracks (max. (7)) in a program, press the PLAY MODE/ PROG/CLK.SET button 20. "P01". appears on the display. MEMORY appears on the display. • Press the PREV TUNE- (11) button or the NEXT/TUNE+ (11) button to select a desired track. • Press the PLAY MODE/PROG/CLK.SET button (7) to confirm the selection. Repeat the previous step to select more tracks and confirm every selection with the PLAY MODE/PROG/CLK.SET button (7).
5.6 USB and memory card 55 Due to the great variety of products with USB ports and their sometimes quite manufacturer-specific functions we can neither guarantee that all devices will be recognised, nor that all operating options that are possible in theory will actually work. 3 9 5 12 11 14 USB functions • Insert the USB device in the slot (14). The device can only be connected one way. • To select the source mode USB, press the FUNCTION button (5). • USB appears on the display.
During playback, the following functions are available: • To select a track, press the PREV TUNE- (11) button or the NEXT/TUNE+ (11) button until the desired track is set. • Press and hold the PREV TUNE- (11) button or the NEXT/TUNE+ (11) button to rewind or forward the track. • To pause playback, press the PLAY/PAUSE button ((9)) once; to resume playback, press the button again. • Press the button PLAY MODE/PROG/CLK.
5.8 Operation with BLUETOOTH 3 sec Search NPRC56PK PINcode 0000 connected 5 7 You can wirelessly connect the NPRC56PK to devices that have Bluetooth A2DP. Preparation • To select the source mode BLUETOOTH, press the FUNCTION button (5). "BT" appears on the display. Your NPRC56PK is now ready to establish a wireless connection with your Bluetooth device. Establishing a Bluetooth connection (PAIREN) • Turn on the Bluetooth function of your device • Go to the Bluetooth Menu of your Bluetooth device.
Reconnect via Bluetooth If you move outside the Bluetooth range, the connection will be automatically terminated. The Bluetooth connection will be recovered again as soon as you come within the Bluetooth range. 5.9 Auto Power System (APS) 4 The Auto Power System (APS) is intended to save energy.
6 Cleaning and maintenance 66 WARNING Before performing any cleaning or maintenance, switch off and unplug the appliance. • Clean the outside of the appliance with a soft cloth. When the appliance is very dirty, dampen the cloth slightly with water and a neutral solution. 6.1 Handle and care of a disc • Hold the disc with fingers. Hold the disc outer edge and/or the centre spindle hole. Do not touch the disc surface. • Do not bend or press the disc.
7 Specifications Voltage: 110-230VAC ~ 50/60 Hz • Power consumption: 14 Watt • Standby power consumption: < 1 Watt • Speaker output: 2 x 1,5 W RMS • Max power: 2 x 1,8 Watt RMS • Battery size: AA (4x) • Disc types: CD/ CD-R/ CD-RW • Maximum USB memory: 16 GB • Audio formats: MP3 • Frequency range: 87,5 - 108 Mhz • 20 memory locations are available. • Dimensions: 25 x 11 x 20,3 cm • Weight: 1100 g. • LCD Display • USB slot • Memory card slot (SD/MMC) • Headphone jack • AUX jack: 3.
8 Disposal of used electric and electronic equipment The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.
