Operation Manual

12
5.2 Seng an alarm
5 Cauon!Youcansetandacvatetwoalarms.
10
12
11
6
Alarm 1
Settheapplianceinthestandbymode.
KeepkeyPRE-/AL1(10)pressedfor2seconds
AL1appearsonthedisplay.
PressthePREVTUNE-(11)orNEXTTUNE+(11)keytosetthedesired
hour.
PressPRE-/AL1(10)toconrm.
PressthePREVTUNE-(11)orNEXTTUNE+(11)keytosetthedesired
minutes.
PressPRE-/AL1(10)toconrm.
ToselectthesourcemodeTUNER/CD/CARD/USB/AUX/BLUETOOTH,
pressthePREVTUNE-(11)buonNEXT/TUNE+(11).
PressPRE-/AL1(10)toconrm.
PressthebuonVOL-(6)orthebuonVOL+(6)tosetthevolume.
PressPRE-/AL1(10)toconrm.
5 WhenthesourcemodeCDhasbeenselected,aCDmustbeinthe
appliance.IfthereisnoCD,thealarmwillnotgoo.
5 WhenthesourcemodeUSBorCARDhasbeenselectedandthereis
noUSBormemorycardpresent,theradiomodewillbeswitchedon
whenthealarmgoeso.
Alarm 2
Todothis,repeatthelast8steps.
Acvangthealarm
KeepkeyAL2/PRE+(10)pressedfor2seconds
PresstheAL2/PRE+keyonce(10).