How to Use 4 Memo For function of each button, refer to “Button List” on page 10. Open the cover. 1) Press 2) Turn (Refer to “Open the cover of the lightsaber” on page 51.) 5 Press the button and talk, paying attention to microphone and speaker location. Make sure that your phone is online on contact screen. Select Skype Sound Test. Click [ONLINE] button and [TALK] button on screen key. Then press the talk button on Skype screen to talk.
How to Use Operate R2-D2 in The House from Outside Location [Skype Mode] You can move R2-D2 in your house by Skype talk between the computer in your house and another computer outside the house. Memo To use R2-D2 in Skype mode, you need to create another Skype account besides the current account. Refer to “How To Create A Skype Account” on page 55. < At home > • Disable the power saving function of the computer • Start Skype • Change Skype settings.
How to Use How To Create A Skype Account To operate R2-D2 located at home from an outside location, you need to create another Skype account exclusively for operation of R2-D2. R2-D2 cannot be operated by using the Skype account registered for Skype calls. Note: To protect your privacy, please create 2 separate accounts for R2-D2 operation and Skype calls. When “Auto-answer calls” is set for Skype calls, any Skype user can view your room if you select “Anyone” for “Allow calls from”.
How to Use 3 How To Create A Skype Account 1 Following the instructions on the screen, set up your Skype name (account ID) and password exclusively for R2-D2. Log out of Skype. 2 4 Subsequently, perform the same procedures as when you created your Skype ID for the first time.
How to Use Changing the Skype Account Add Contact to Your Contact List 1 • From outside Add the account to be used in your house to your contact list by [Tools] – [Add contact]. Log out of Skype. 2 Enter the account of your computer to be used outside of the house in the search box and perform a search. Select a Skype name. Find and select the search result you wish to add. Click “Add Skype Contact”. • At home Add the account of your computer to be used outside of the house to your contact list.
How to Use Skype settings on the computer at home Please make the following settings. 1 2 3 Turn on R2-D2 power. (Refer to “Turn on R2-D2 Power” on page 29.) 5 6 Click [Tools] – [Options] – [Video]. Click [General] – [Video settings]. Check [Enable Skype Video] and check [Start my video automatically] in the “When I am in a call section”. Select [TridVid Capture] in the [Select Webcam] section. 4 Click [Detail]. Select [Calls] – [Incoming Calls].
How to Use 8 9 Skype settings on the computer used outside Click the [Save] button. Note: Do not activate the camera viewer. Start R2-D2 launcher to activate the screen key. 10 Memo To connect to R2-D2 located at home from an outside location, click the [ONLINE] and [CONTROL] buttons using the screen key on your computer used outside. The popup window allowing you to select the connecting destination will be displayed. Select the account to be used in your house.
How to Use 4 Call the computer located in your house through Skype. 7 When operating R2D2 using screen key, select the connecting destination. Memo This operation is not necessary if you operate R2-D2 with the lightsaber. Click either one. You will receive images from the computer located in your house after a few seconds. 5 Activate the screen key. 6 Click the [ONLINE] and [CONTROL] buttons.. R2-D2™ Skype Web Cam 8 Operate R2-D2 with the lightsaber or screen key..
How to Use Sound Action of Lightsaber Swing the lightsaber When the lightsaber power is turned on, the LED indicator lights up in blue and you can enjoy the lightsaber sounds same as the one heard in the movie. Note: Before you swing the lightsaber, make sure that the LED indicator is fixed to the lightsaber firmly by referring to page 39. If the LED indicator is not fixed firmly, the batteries inside may come off and cause personal injury.
Camera Viewer Settings Click [MENU] button displays the list of setting menus. Configure settings by selecting desired menu. Setting screen may be changed by clicking a tab. • [Security] screen Configures setting to ask for password on startup. Item Description Ask for password on Configures whether or not to enter startup password on startup. Old Password Input old password to change password. New Password Input new password. Input a password in this column to set your password for the first time.
Camera Viewer Settings • [Display] screen • [Alarm] screen Configures settings on camera images. Records motion pictures or take still pictures in response to movement or sound captured by the camera. Item Camera Alias Description Sets the camera channel (CH1 or CH4) printed on the package. On Screen Display Displays date, time and channel number on the screen. Video Adjustment Standard: Selects video standard (PAL/ NTSC). ¯ This selection is not required for this product.
Camera Viewer Settings • [Record] screen • [Capture] screen Configures settings on recording motion pictures. Configures settings on capturing still pictures. Item Record File Path Description Selects the location to store recording motion pictures by clicking [Change] button. Record File Setup Sets file format of recording motion pictures. Compression: Selects compressing method for motion pictures. File Format: Selects file format of motion pictures. Image Size: Selects the size of motion pictures.
Camera Viewer Settings • [Plan task] screen • [Channel] Configures setting to take still or motion picture automatically at a preset date and time. Set the following items by clicking [New] button and register by pressing [Add] button. Use this product while the Sound is set to OFF. If it is set to ON, change it to OFF. Item Task Strategy Timing Operation Channel Description Selects alarm cycle (Daily, Weekly, Monthly or Only Once). Sets the date and time for recording or capturing pictures.
Uninstall Software This section describes how to remove unnecessary software and/or Skype. 4 1) Click to select. 2) Click SkypeAPI Cancel the link between Skype and other applications (dialer, R2-D2 launcher and screen key). 1 3) Click Start Skype. Remove both of the above. 2 Click [Tools] – [Options] – [Advanced] – [Update]. Dialer 1 3 1) Click Click [Start] – [All Programs] (or [Programs]) – [USBPhone (LCD)] – [USBPhone Dialer_Skype] – [Uninstall].
Uninstall Software ffdshow Camera viewer 1 1 Click [Start] – [All Programs] (or [Programs]) – [ffdshow] – [Uninstall]. Subsequently, operate following the instructions on the screen. R2-D2™ Skype Web Cam Click [Start] – [All Programs] (or [Programs]) – [NIKKO] – [CameraViewer] – [Uninstall CameraViewer]. Subsequently, operate following the instructions on the screen.
Uninstall Software R2D2 Launcher Skype 1 Memo 2 3 Click [Start] – [Control Panel] (or [Settings] – [Control Panel]). Double-click [Add or Remove Programs]. 1) Click If you continue to use Skype, do not uninstall. 1 2 2) Click 3 Click [Start] – [Control Panel] (or [Settings] – [Control Panel]). Double-click [Add or Remove Programs]. 1) Click ¯ Skype version varies depending on installation conditions.
Troubleshooting Trouble [ONLINE] and [OFFLINE] on screen key cannot be switched. Lightsaber does not function as a Skype phone button. R2-D2 does not move. R2-D2™ Skype Web Cam Check the followings Is Skype online? (Set to ) Is Skype online? (Set to ) Is the battery polarity correct? Install batteries in the correct polarity. Is the power switch on R2-D2 set to “OFF” position? Set the power switch to “ONʼ or “Standby”.
Troubleshooting If the tire does not roll smoothly, remove the cover and clean the dust accumulated around the axle. 3) Remove dust 2) Remove the cover 1) Remove the screw with a Phillips-head screwdriver. 4) Assemble back No picture is displayed on camera viewer. R2-D2™ Skype Web Cam Has device controller been installed in camera viewer? Check the installation. Is the stand connected to computer with USB cable? Connect computer and stand with USB cable.
Troubleshooting Troubles about Skype R2-D2™ Skype Web Cam Is [Start my video automatically] checked? Click [Tools] – [Options] – [Video] and check [Start my video automatically]. Is correct webcam selected on Skype? Click [Tools] – [Options] – [Video] – [Select Webcam] and check the setting. Is the channel of camera viewer correct? For camera viewer channel, either CH1 or CH4 is specified on the package. Make the correct setting on the “Channel” screen of the menu setting.
Troubleshooting 1. On Windows, click [Start] – [Control Panel] – [Sound, Voice and Audio Device] – [Sound and Audio Device]. (For Windows 2000), click [Start] – [Settings] – [Control Panel] and double-click [Sound and Audio Device]. 2. Click [Audio] tab. 3. Click [Volume] button on [Sound playback] and adjust the volume, balance and tone on the displayed screen. 4. Make the similar settings for [Sound recording]. 5. Click [OK] button. Talk is interrupted.
Troubleshooting Select the appropriate device driver and then click [Next]. Usually, choose “Trident Analog Video”. The device driver to be installed will be displayed on the screen. Confirm and click [Next] if the device driver is correct. The screen requiring insertion of the installation CD or the screen shown above will be displayed. If the screen requiring insertion of the installation CD is displayed, insert it.
Specifications • R2-D2 (Web camera) Image sensor Resolution CMOS 510×492 (NTSC) 628×582 (PAL) View angle 62° Min. illuminance 5lux/F1.2 Transmit frequency ISM 2.4GHz ~ 2.
Specifications FCC Certifications This equipment Equipmenthas hasbeen beentested testedand andfound foundtoto comply with limits a Class B digital device, pursuant to part of the FCC This comply with thethe limits forfor a Class B digital device, pursuant to Part 15 of15FCC Rules. Rules. limits Theseare limits are designed to provide reasonable protection interference when theinstallation.
