User's Manual

B Error Messages
142 Spectra Precision Focus 4 Total Station User Guide
Z-coordinate is required
The input point for Benchmark does not have a Z coordinate.
Press any button to return to the PT input screen. Then use a PT that has a
Z coordinate. See page 68.
System error
=SYSTEM ERROR=
The system has detected an internal error that is related to the lower-level system.
Press any key to turn the instrument off. The system will reboot when this error is
reported. If you still have more points to shoot in the site, turn the instrument on and
repeat the open a job and station setup procedures.
Data stored before this error will be kept safely in the Job file. If the error appears
frequently, please contact your dealer or Trimble Support and report the message that
appears below the
=SYSTEM ERROR= line.