User's Manual

5 Menu Key
130 Total Station Nivo Series Instruction Manual
Use an RS-232C cable to connect the instrument to the
computer.
The Free space field shows the number of points that
can be stored.
Press [ENT] to put the instrument in receive mode. Then
use the Send Text File command in the terminal program on the computer to start
sending data.
As each point is received by the instrument, the value
in the Records field is incremented.
Advanced feature: Editing the data order for upload
1. To open the Data Fields screen, press the Edit
softkey.
2. To move between the fields, press [<] or [>].
3. To change the selected item in a field, use the
and softkeys. The options are PT, N, E, Z, CD,
or blank.
4. To save your changes and return to the previous
screen, press the Save softkey.
For example, if your original data is as follows:
and you set the data fields to PT N E CD, then the uploaded data is:
In the terminal program, set flow control to Xon/Xoff.
If you press [ESC] during data upload, the upload is canceled and the display returns to the Communication
menu. Records that were received before you pressed [ESC] are stored in the job.
The system truncates any code that is longer than 16 characters.
Duplicate points
If the existing point is a UP, CC, or MP record, and it is not referred to by any ST or BS, it is automatically
overwritten by the uploaded point. No error message appears.
1, UB, 30.000, 20.000, L1
PT=1, N=30.000, E=20.000, CD=L1