User's Manual

5 Menu Key
132 Total Station Nivo Series Instruction Manual
[MSR] key settings
To change settings for the [MSR1] and [MSR2] keys, press
[1] or select [MSR] in the 1sec-Keys menu.
There are two [MSR] keys:
• To change the settings for the [MSR1] key, press [1]
or select MSR1.
• To change the settings for the [MSR2] key, press [2]
or select MSR2.
Each [MSR] key has five settings.
In the Const and AVE fields, use the numeric keys to
enter values. In the other fields, use [<] or [>] to change
the settings.
B
Tip – You can also access the settings screen by holding down [MSR1] or [MSR2] for one second.
[DSP] key settings
To change the display items in the BMS and in
Stakeout observation screens, press [2] or select [DSP]
in the 1sec-Keys menu.
To move the cursor, use [<], [>] , [^], or [v]. To change the
display item, press either the softkey or the softkey.
To save the changes, press [ENT] at the last line of
<DSP3> or press the Save softkey.
B
Tip – You can also access the DSP settings screen by holding down [DSP] for one second.
[USR] key settings
To change the functions that are assigned to the [USR1]
and [USR2] keys, press [3] or select [USR] in the
1sec-Keys menu.