User's Manual
Trimble TS635 Construction Total Station User Guide 67
Applications 4
Advanced feature: Specifying a layout list by inputting points by range
1. Select the
Fr/To softkey when the PT field is
selected.
2. Enter the start point (Fr) and the end point (To).
The range between Fr and To must be less than
1001 points.
– If existing points are found between Fr and
To, a point list appears.
To highlight a point in the list, press
[^] or [v].
To go to the layout observation screen, press
[ENT]
.
– If you have assigned a control job, and
additional points are found in the control
job, the
Ctrl softkey appears under the list.
Programs menu
To access the Programs menu, press [PRG] in the BMS.
To select a command from the Programs menu, press
the corresponding number key. Alternatively, press
[^] or
[v] to highlight the command and then press [ENT].
The last function used is highlighted.
The Programs menu has the following options:
• RDM (Radial), page 69
• RDM (Cont), page 69
• REM, page 70
• V-Plane, page 70
• Cogo, page 71