User's Manual

Trimble TS635 Construction Total Station User Guide 71
Applications 4
a. To enter the first point by direct
measurement, select the
MSR softkey. A
temporary observation screen appears.
b. Press
[MSR1] or [MSR2]. The Record PT screen
appears.
c. Enter a value in the PT and CD fields, and
then press
[ENT].
3. Enter the second point in the vertical plane. To do this, repeat Step 2.
Once the plane is defined, the calculated Dwn and dZ values are updated as you
move the telescope. No distance measurement is required.
Note – Press
[DSP] to switch between display screens. See also page 83.
4. Press
[ESC] to exit this function.
Cogo
Choose the Cogo option to perform coordinate
geometry (Cogo) calculations.
To open the Cogo menu, press
[5] on the Programs
menu.
There are five items in the Cogo menu:
• Inverse, page 72
• Input, page 74
• Area & Perm, page 76
• Down+Out, page 77
• Intersection, page 78
Dwn Horizontal distance from P1 to the
target point along the baseline
dZ Vertical distance from P1 to the
target point