User's Manual

Trimble TS635 Construction Total Station User Guide 75
Applications 4
To enter P1 and P2, enter point names or take
measurements to targets.
Enter the plus-minus angle, horizontal distance, and
vertical distance from the baseline defined by P1–P2.
If you do not enter a value in the dVD field, the value
0.0000 is used.
When you press
[ENT] in the dVD field, a new point is
calculated. The name in the PT field defaults to the last
recorded point, + 1.
To record the new point and return to the point input
screen, press
[ENT].
P1 (the base point) defaults to the previously recorded
point value. P2 defaults to the previous P1 value.
B
Tip – To continuously calculate a new point, enter +Ang, HD, and dVD from the previous
bearing line. This is a convenient way to enter Traverse points.
Entering coordinates
To manually enter the XYZ coordinates, press [3] or
select
Input XYZ from the Input menu.
The PT name defaults to the last recorded PT + 1.
Enter the coordinates using the numeric keys. To move
to the next field, press
[ENT] or [v] in a field.
To store the point as an MP record and return to the
point input screen, press
[ENT] in the Z field. The default
PT is incremented to the next value.
You can record NE, NEZ, or Z-only data.