User's Manual

Trimble TS635 Construction Total Station User Guide 87
Menu Screen 5
– To check the job settings, select the Sett
softkey.
– To create a new job using the current job
settings, press
[ENT] or select the OK softkey.
Job settings
Job settings are separate from other temporary settings.
Job settings are established when a job is created, and cannot be changed. This ensures
that the data in a job is correctly stored in the database, and that all necessary
corrections are applied when you store each record.
To move between fields, press
[^] or [v]. Alternatively, to move to the next field, press [ENT].
To change the setting in the selected field, press
[<] or [>].
To confirm the job settings and create the job, press
[ENT] in the last field.
Screen 1
Screen 2
Scale Factor 0.999600 to 1.000400
T-P correction ON / OFF
Sea Level ON / OFF
C&R correction OFF / 0.132 / 0.200
Angle unit DEG / GON /MIL
Distance unit Metre / US-Ft / I-Ft
Temp unit °C / °F
Press unit hPa / mmHg / inHg