User's Manual

5 Menu Screen
96 Trimble TS635 Construction Total Station User Guide
The header (XYZ, YXZ, NEZ, or ENZ) depends on the Coord. Label setting, which is
accessed by pressing [MENU]
and then selecting Settings / Coord. See also
Coordinate, page 93.
UP, MP, CC, SS, and SO records
All coordinate records contain PT, CD, X, Y, and Z fields.
• UP records are uploaded point coordinates.
• MP records are manually input point coordinates.
• CC records are points calculated in Cogo.
• SS records are sideshot records stored in the BMS.
• SO records are stored in layout functions.
Deleting coordinate records
1. In the XYZ screen, use [^] or [v] to highlight the
record that you want to delete. Then select the
DEL softkey.
2. A confirmation screen appears.
a. To delete the selected record, press
[ENT] or
select the
Yes softkey.
b. To cancel the deletion of data, press
[ESC] or
select the
No softkey.
Alternatively, delete coordinate data by selecting
the
DEL softkey in the detailed display screen for
the record.
If the record that you want to delete is referred by
any station record, a confirmation message
appears.
Editing coordinate records
You can edit point, CD, and coordinate values in coordinate records. However, you
cannot edit the coordinate record for the current station.